yayao

Basic knowledge of metalworking tools

2019-01-23 09:32

Basic knowledge of metalworking tools: When selecting the angle of the tool, it is necessary to consider the influence of various factors, such as workpiece material, tool material, processing properties (rough, finishing), etc., which must be reasonably selected according to the specific conditions. Generally speaking, the tool angle refers to the angle of labeling used for manufacturing and measurement. In actual work, the actual working angle and the angle of the marking are different due to the different mounting positions of the tool and the change of the cutting motion direction, but usually the difference is small. . The material used to make the tool must have high high temperature hardness and wear resistance, necessary bending strength, impact toughness and chemical inertness, good processability (cutting, forging and heat treatment, etc.) and not easily deformed. Generally, when the hardness of the material is high, the wear resistance is also high; when the bending strength is high, the impact toughness is also high. However, the higher the material hardness, the lower the bending strength and impact toughness. Due to its high flexural strength and impact toughness and good machinability, high-speed steel is still the most widely used tool material, followed by hard alloys. Polycrystalline cubic boron nitride is suitable for cutting high hardness hardened steel and hard cast iron; polycrystalline diamond is suitable for cutting iron-free metals, and alloys, plastics and glass steel; carbon tool steel and alloy tool steel are now only used Tools such as trowels, dies and taps. Carbide indexable inserts have now been coated with titanium carbide, titanium nitride, alumina hard or composite hard layers by chemical vapor deposition. The evolving physical vapor deposition method can be used not only for cemented carbide tools, but also for high speed steel tools such as drills, hobs, taps and milling cutters. As a barrier to chemical diffusion and heat conduction, the hard coating slows the wear of the tool during cutting, and the life of the coated blade is about 1 to 3 times higher than that of the uncoated one. Due to the high temperature, high pressure, high speed, and parts working in corrosive fluid media, more and more difficult materials are applied, and the automation level of cutting and the requirements for machining accuracy are getting higher and higher. In order to adapt to this situation, the development direction of the tool will be to develop and apply new tool materials; further develop the vapor deposition coating technology of the tool to deposit a higher hardness coating on the high toughness and high strength substrate to better solve The contradiction between the hardness and strength of the tool material; further develop the structure of the indexable tool; improve the manufacturing precision of the tool, reduce the difference in product quality, and optimize the use of the tool. According to the cutting motion mode and the corresponding blade shape, the tools can be divided into three categories. General-purpose tools such as turning tools, planing knives, milling cutters (excluding formed turning tools, forming planers and forming cutters), boring tools, drill bits, reaming drills, reamers and saws; forming tools, cutting edges for such tools Having the same or nearly the same shape as the workpiece to be machined, such as forming turning tools, forming planers, forming cutters, broaches, cone reamers, and various threading tools; forming tools are gears that are machined by the forming method. Tooth surface or similar workpieces such as hobs, pinion cutters, shaving cutters, bevel gear planers and bevel gear milling cutters. The working part of the tool is the part that produces and processes the chip, including the blade, the structure that breaks or rolls the chip, the space for chip removal or chip storage, and the passage of the cutting fluid. Some working parts of the tool are cutting parts, such as turning tools, planers, boring tools and milling cutters; some working parts of the tool include cutting parts and calibration parts, such as drill bits, reaming drills, reamers, and internal surfaces. Knives and taps, etc. The function of the cutting part is to cut the chips with a cutting edge, and the calibration part serves to polish the machined surface and guide the tool. The working part of the tool has three types: integral, welded and mechanically clamped. The overall structure is to make a cutting edge on the cutter body; the welded structure is to braze the blade to the steel body; the mechanical clamping structure has two kinds, one is to clamp the blade on the cutter body, and the other is to clamp the blade to the cutter body, and the other The brazed bit is clamped to the body. Carbide tools are generally made of welded structures or mechanically clamped structures; ceramic tools are mechanically clamped. The structure of each tool consists of a clamping part and a working part. The clamping part and the working part of the overall structural tool are made on the body; the working part (knife or blade) of the inserting tool is mounted on the body. The clamping part of the tool has two types of holes and handles. The perforated tool is placed on the spindle or mandrel of the machine tool by means of the inner hole, and the torsional moment is transmitted by means of the axial key or the end key, such as a cylindrical milling cutter, a sleeve face milling cutter and the like. Tool shanks usually have three types: rectangular shank, cylindrical shank and tapered shank. Turning knives, planing knives, etc. are generally rectangular shanks; taper shank * taper is subjected to axial thrust, and torque is transmitted by friction; cylindrical shank is generally suitable for small twist drills, end mills and other tools, when cutting by means of clamping The generated frictional force transmits the torsional moment. Many of the shank-handled shanks are made of low-alloy steel, while the working part is made of high-speed steel to butt weld the two parts.

China Jiangmen Company:

Address: Gelang Village, Yayao Town, Heshan City, Guangdong Province

 

Contact: Mr. Shi 13828026111

Phone: (86) 750-8546666

Fax: (86) 750-8288089

E-Mail: stb@yayao.net / yayao@yayao.net

Hong Kong Weihui Company:

Address: Room 1909, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, Hong Kong

 

Phone: 852-24279288

Fax: 852-24273198

E-Mail:welf@biznetvigator.com

Shenzhen Minhui Company:

Address: Room 807, Building A, Taojindi E-Commerce Building, Tenglong Road, Dalang Street, Longhua District, Shenzhen

 

Email: qin@yayao.net

Phone: 0086-755-23549945

Mobile: 0086-13509600906

ICP

Time of issue:2019-01-23 00:00:00

Copyright Heshan Yayao Gelang Hardware Industry Co., Ltd. All rights reserved 粤ICP备05054328号 Support: www.300.cn Jiangmen